Connecting Everything At Your Site
Connect Any Type of
Analog or Status Sensor

Directly connect up to 12 analog sensors, 4 status sensors, and 1 audio feed. No extra boards to buy!

320 Inputs
Versatile Metering Inputs

Directly connect analog sensors with output  levels ranging from 0V to 60V to any of the 12 single-ended metering inputs!

Use the Metering inputs to turn the Cortex 320 into an audio silence detector using the integrated audio rectifiers available on every input!

The Metering inputs are so versatile that any of them can be configured as a Status input, boosting up the number of digital inputs from 4 to 16!

testing (1)
Independent Grounds for Each Opto-isolated Status Input

Fully independent ground returns help reduce noise and ensure isolation between status inputs.

Activity Monitoring

All status inputs have built-in activity monitoring that checks for abnormal activity time on the input. Daily cumulative run-times are stored and logged.

Control External 

With its 6 relay outputs (3 form C and 3 form A/B), the Cortex 320 can command and control other equipment. From remotely switching to a backup transmitter to turning on the generator when a power outage occurs, the Cortex 320 can take smart decisions to keep your site transmitting. 

320 Relay Outputs
Need More I/O?
No worries, MEXM expansion panels or Modbus slaves will let you add up to…
Simple Network Management Protocol (SNMP)
SNMP Agent
The Cortex 320 has a built-in SNMP agent that lets you monitor and control it from a central SNMP manager. When activated, this agent allows remote SNMP management systems to perform GETs, SETs and to receive TRAPs from Davicom units.
This feature has the added benefit of converting non-SNMP legacy site devices into SNMP-capable equipment through the Cortex320’s GPIO and SNMP agent.
SNMP Manager
The Cortex 320’s optional SNMP Manager allows it to take readings, set controls and receive alarms from SNMP enabled devices such as transmitters. This monitoring and control is achieved over a simple TCP/IP connection between devices, thus greatly facilitating interface wiring.
Optional SNMP Packages Available
Create a Cortex 320 Network

Use the Cortex 320’s SNMP agent and manager (optional) to build a complete network of
interconnected, interacting and redundant site managers.

Design Automation Without a Single Line of Code!

Davicom systems provide automation with decision-making features and commands that go well beyond conventional telemetry systems. The Davicom units can, for example, detect an RF failure, place the standby transmitter on-air to restore the signal and alert on-call personnel. Engineering staff can then diagnose the problem from the event history log and, using remote data measurements, decide on the appropriate course of action.

Network PINGs

Use Network PINGs to
debug your network!

Ping different network branches or even the outside Internet to map network connectivity and faults.

Or use this feature as a
failsafe to reset unresponsive
network equipment!

Have your Davicom automatically reset network components from the remote end of your network link.

Complete Web-Based Interface
Clean. Modern.  Easy To Use.
The Cortex 320’s web-based  workspaces are completely customizable by the user. In addition, each user can have different workspaces on multiple devices (smartphone, tablet or PC). These workspaces have the advantage of being  stored directly on the Cortex 320 unit itself, thereby ensuring a uniform look when being accessed by different users. For low-bandwidth communications, workspaces may also be located on your personal computer using our DavLink software.
Save Two Firmware
Versions in the
Same Unit
Count on stress-free firmware upgrades thanks to the Cortex’s dual firmware memory spaces that ensure fail-over and rollback operation. Upgrades become virtually unbreakable, even if you pull the plug during an upgrade!
Top-Quality Design
for Electromagnetic
Davicom units have been developed and tested to operate in high-level electric fields and to resist electrostatic discharges. Exactly the type of environment you would expect to find near high power transmitters on a mountaintop with a metal tower!
Smartphone app for
Easy Control &

Davicom units have been developed and tested to operate in high-level electric fields and to resist electrostatic discharges. Exactly the type of environment you would expect to find near high power transmitters on a mountaintop with a metal tower!
Why Should I Buy a Cortex 320 ?
The all-in-one design gives you the possibility of connecting almost any type of sensor or network enabled device.
Reduce site maintenance costs by optimizing site trips and on-site repair time
More efficient employees will be more relaxed and have more time to accomplish other important tasks
Increase your site to technician ratio significantly.
Obtain detailed knowledge of site problems so you bring the right replacement part with you
Let the Cortex make decisions and take immediate actions to ensure that your site operates at peak efficiency 24/7.
Communicate with your site from anywhere in the world!
Through detailed knowledge of site conditions
New Hardware Architecture.
Ready for the Future.
Have specific requirements?

Copyright Davicom, a division of Comlab Telecommunications Inc.

2272 Leon Harmel,
Quebec, QC Canada, G1N 4L2

CA/US : 1.877.282.3380
INTL : +1.418.682.3380